I How To Start Collective Operation - Sanyo RCS-SH80UA Instruction Manual

I How to start collective operation

To start collective operation (ALL or ZONE)
1
2
7
Power Turn the power supply switch on 5 hours or more before starting operation.
1 Press the SELECT button and select ALL or ZONE.
In case of ZONE collective operation.
2 Select the ZONE No. to be operated by pressing ZONE button.
3 Press the ON button.
4 Set the operation mode by pressing the MODE button.
5 Set the desired temperature by pressing one of the temperature setting buttons
6 Set the desired fan speed by pressing the FAN SPEED button.
7 Select the control mode.
Stop Confirming the ZONE No. to be selected or ALL indication, press the OFF button.
NOTE
OI-432-04 - 9EG
In the ALL or ZONE mode, no flap setting can be performed. If necessary, you
should select the GR mode and use the FLAP button
3
Stop
4
5
6
.
4
4 - 9