Switch To A Server - D-Link DGS-1510-20 Hardware Installation Manual

DGS-1510 Series Gigabit Ethernet SmartPro Switch Hardware Installation Guide

Switch to a Server

The Combo Copper/SFP ports are ideal for connecting a network backbone, server or server farm to
the Switch. The copper ports operate at a speed of 10/100/1000Mbps in half-duplex or full-duplex
mode. The fiber-optic ports can operate at both 100/1000Mbps in full-duplex mode. The Link LED
turns green when a connection is made.
Figure 3-3 Server to Switch Connection
30