Interface Optical Fiber - Huawei Quidway Eudemon 200 Installation Manual

Installation Manual
Quidway Eudemon 200 Firewall
Table 7-13 1ATM-OC3MM/1ATM-OC3SM/1ATM-OC3SML panels and LEDs description
Name
1ATM-OC
3MM
1ATM-OC
3SM
1ATM-OC
3SML
Category
LINK
ACT

7.8.4 Interface Optical Fiber

1ATM-OC3MM uses multi-mode optical fibers and 1ATM-OC3SM/1ATM-OC3SML use
single-mode optical fibers. As all these three interface modules adopt SC optical fiber
connectors, the connectors of the optical fibers must also be SC connectors. The
external optical cable suite provides the users with optical cables of variable lengths.
SC-type optical connector is shown in Figure 7-8:
Figure 7-8 SC-type optical connector
Flash state and description
OFF means the link is not connected and ON means the link is connected.
OFF means no data is being transceived on the interface and blinking means data is being
transceived.
Panel figure
7-19
Chapter 7 Interface Module