Power On The Eudemon200 - Huawei Quidway Eudemon 200 Installation Manual

Installation Manual
Quidway Eudemon 200 Firewall
Figure 4-5 Setting terminal type

4.1.2 Power on the Eudemon200

I. Check before power-on
Perform the following check items before powering on a Eudemon200 firewall:
Whether the power cord and ground wire are correctly connected.
Whether the voltage of the power supply complies with the requirement of the
Eudemon200 firewall.
Whether the console cable is correctly connected, whether the PC or terminal for
configuration is started, and whether the settings are done.
Warning:
Before switching on the power, locate the power switch in the equipment room, so that, in case of an
electrical accident, power can be quickly turned off.
Chapter 4 Boot and Configuration
4-4