Flow Specifications - BD Diesel Performance Flow-MAX V3 Installation Instructions Manual

3 October 2016
12. Wiring should be attached with the use of supplied tie wraps so that the
wiring will be away from contacting hot surfaces and/or moving components.
Once the wiring is attached and everything is in place the positive and
negative terminals can be attached to the battery.
Make sure that all fuel lines, wiring harness' are fixed in place well.
13.
14. Re-install the front driveshaft (4x4 models only).
15. Lower the vehicle, and re-install the battery cables.
The pump will develop 15-18psi at idle with 14VDC. If your battery voltage is
lower so will the pressure.

Flow Specifications

 Flowrate should be MINIMUM 2.5GPM(150GPH) @ 14VDC
OR
 Filling a 1 gallon container every 24 seconds @ 14VDC
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit (I-00167)
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 13 -