3 October 2016
5. Insert the three rubber isolators into
the support bracket.
water to aid in lubricating the
isolators as the slide into the bracket.
Place the large washers on the inside
of the bracket against the rubber
isolator.
Tighten
the
through each vibration isolator of the
support bracket and into mounting
bracket (PEM) nut. Repeat this step
for the other 2 bolts.
Torque the three bolts to 10-14ft-lbs.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit (I-00167)
Use some
supplied
M8
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
Straps & Frame
Not shown
bolts
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
- 5 -
Mounting bracket
Isolator
Support Bracket
Washer
Bolts