Before You Begin; Optional Accessories; Required Tools; Installation - BD Diesel Performance Flow-MAX V3 Installation Instructions Manual

3 October 2016
Flowmax Bracket (box frame)

Before You Begin

The FlowMax pump is designed to be a stand-alone pump system and is not
designed to be used in conjunction with stock lift pumps. If your truck has been
retrofitted with the Chrysler in-tank lift pump you will have to lower the fuel tank &
delete the pump from in the tank. BD offers a simple retrofit kit complete with
instructions & the pieces needed to do this, part number 1050302. If you are unsure
if your truck has been retrofitted simply check that the factory lift pump is still in
place on the engine next to the fuel filter housing (see diagram on pages 9 & 10); if it
is not there then your truck has the in-tank pump.

Optional Accessories

 1081130 - Low Fuel Pressure LED Alarm kit
 1050350 – Water in Fuel Sensor Kit (2000-07)

Required Tools:

 5mm Allen wrench
 Drill
 1/8" and 11/32" Drill bits
 Pliers
 3/16" Flat Screwdriver
 10 mm Socket or wrench

Installation

1. Disconnect both batteries.
2. Raise the vehicle and support it safely.
3. Unbolt the front driveshaft (4x4 only) for ease of installation.
U.S. Shipping Address: 88-446 Harrison St, Sumas, WA 98295
# 1050301D 1998.5-2002 Dodge Cummins FlowMAX Lift Pump Kit (I-00167)
1500372
Qty: 1
Plant Address: 33541 MacLure Rd. Abbotsford, BC, Canada V2S 7W2
Phone: 604-853-6096 | Fax: 604-853-8749 | Internet: www.bd-power.com
 Small Pipe Cutter
 Knife To Cut Fuel Hose
 9/16" Socket or Wrench
 7/16" Socket or Wrench
BD Engine Brake Inc.
U.S. Mailing Address: P.O. Box 231, Sumas, WA 98295
1500392
Mount Strap 20.7"
Qty: 2
- 3 -