Table of Contents
Advertisement
3. Open the oven door and put the connector
(B) into the outlet valve (A).
4. Push the connector again and again when
you empty the water tank.
Clock functions
Clock functions table
Clock function
TIME OF DAY
MINUTE MINDER
DURATION
END
Press
again and again to switch
between the clock functions.
To confirm the settings of the clock
functions, press
seconds for an automatic
confirmation.
Setting the DURATION or END
1. Press
again and again until the display
shows
or
or
flashes in the display.
2. Press
or
to the set the values and
press
to confirm.
www.zanussi.com
A
B
C
To set, change or check the time of day. Refer to "Setting the
time".
Use to set a countdown time (maximum 23 h 59 min). This func-
tion has no effect on the operation of the appliance. You can set
the MINUTE MINDER at any time, also if the appliance is off.
To set how long the appliance operates. Use only when an oven
function is set.
To set when the appliance must deactivate. Use only when an
oven function is set. You can use Duration and End at the same
time (time delay), if the appliance is to be activate and deactivate
automatically later.
or wait 5
.
The water tank can have some
water when the display shows
symbol. Wait until the water
flow from the water outlet valve
stops.
5. Remove the connector from the valve when
the water stops flowing.
Do not use the drained water to fill
the water tank again.
Application
For Duration
first you set the minutes and
then the hours, for End
hours and then the minutes.
An acoustic signal sounds for 2 minutes after
the time ends.
or
setting flash in the display. The oven stops.
3. Turn the knob for the oven functions to the
off position.
4. Press any button to stop the acoustic
signal.
If you press
hours for DURATION
appliance goes to setting of the
END
function.
first you set the
symbol and time
when you set the
, the
9
Advertisement
Table of Contents
