Table of Contents
Advertisement
Problem
It takes too long to cook the
dishes or they cook too quickly.
Steam and condensation settle
on the food and in the cavity of
the oven.
The display shows an error code
that is not in this table.
The appliance is activated and
does not heat up. The fan does
not operate. The display shows
"Demo".
Service data
If you cannot find a solution to the problem
yourself, contact your dealer or an Authorised
Service Centre.
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
28
Possible cause
The temperature is too low or too
high.
You left the dish in the oven for
too long.
There is an electrical fault.
The demo mode is activated.
We recommend that you write the data here:
Adjust the temperature if neces-
sary. Follow the advice in the
user manual.
Do not leave the dishes in the
oven for longer than 15 - 20 mi-
nutes after the cooking process
ends.
•
Deactivate the oven with the
house fuse or the safety
switch in the fuse box and ac-
tivate it again.
•
If the display shows the error
code again, contact the Cus-
tomer Care Department.
1. Deactivate the oven.
2. Press and hold the button
3. When an acoustic signal
4. Turn the knob for the oven
5. Release the button
6. Turn the knob for the tem-
The necessary data for the service centre is on
the rating plate. The rating plate is on the front
frame of the appliance cavity. Do not remove
the rating plate from the appliance cavity.
.........................................
.........................................
.........................................
Remedy
.
sounds, turn the knob for the
oven functions clockwise to
the first function. "Demo"
flashes in the display.
functions to the off position.
perature clockwise and hold
it for three seconds. The
acoustic signal sounds three
times. The demo mode is de-
activated.
www.zanussi.com
.
Advertisement
Table of Contents
