Installing Drive Wheels - Huffy 360 Battery Ride-on Owner's Manual

Steering the Unit - Forward and Reverse:
Move both Control Grips FORWARD to move FORWARD
Move both Control Grips BACKWARDS to move BACKWARDS
16

Installing Drive Wheels:

C
B
F
STEPS:
NOTE: BEFORE STARTING, CUT PLASTIC TIES AT EACH MOTOR.
1. Insert Motor Ends so wires and Motor are inside Body Holes
C
2. With one end of Axle on ground, insert one Drive Wheel
D
center Lock Button until Wheel SNAPS into locked position.
3. Slide this Wheel/Axle assembly through one Drive Motor
F
Motor making sure Wheel Gears
B
4. Install other Drive Wheel fully onto axle and push center Lock Button
SNAPS into locked position.
WARNING
: Check that wheels are fully snapped in place by gently pulling
outward.
NOTE:
To remove Wheels, press Center Button
C
B
E
F
A
A
and Axle holes line up.
B
fully onto Axle and push
E
, body and other Drive
fully seat in Drive Motor Sprockets.
D
D
while pulling Wheel OUTWARDS.
D
until Wheel
9