Installing The Fenders; Installing The Seat - Huffy 360 Battery Ride-on Owner's Manual

Connecting Drive Battery:
STEPS:
NOTE:
Battery is located under Seat.
1. With seat removed, fi rmly attach Red Connecter
B
2. NOTE: Black Connector is attached by factory.
12
A
B
A
to Red Battery Terminal as shown.

Installing the Fenders:

R
STEPS - Note - Fenders are marked
1. Position each Fender so that Tabs line up with mounting Slots
2. Press fi rmly and evenly until all Tabs snap into place.

Installing the Seat:

STEPS:
C
1. Tilt Seat so that front edge Tab fi ts
under edge of control Cowling.
2. Position Seat in place as shown so that
A
mounting holes line up.
B
3. Install 4 Screws evenly and securely. -
Do Not Overtighten.
A
L
(right) and (L) (left):
(R)
A
.
B
C
A
13