Electromagnetic Compatibility (Emc) - VitalConnect Platform Instructions For Use & Information Manual

Electromagnetic Compatibility (EMC):

 Vital Connect Sensor may need special precautions regarding EMC and should be used
according to the EMC information provided in the "Warning" and "Caution" sections of
this document.
 Portable and mobile RF communications equipment can affect Vital Connect Sensor. See
Medical Electrical Equipment user manual for RF communication precautions.
 Type of radio modulation, frequency and antenna power is follows:
o Radio modulation: FSK (frequency shift keying)
o Frequency: 2.4 – 2.5GHz
o Antenna power: 4dbm.
Vital Connect Sensor (i.e. patch model #: 545-00006-00 and module model #: 600-0001-00) is
intended for use in the electromagnetic environment specified below. The patient or the end
user of the Vital Connect Sensor should assure that it is used in such an environment.
Emission test
RF emissions CISPR 11
RF emissions CISPR 11
IFU-01, Rev. A
Electromagnetic Emission Declaration
Compliance
Group 1 Vital Connect Sensor uses RF energy only for its
internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in
nearby electronic equipment.
Class B Vital Connect Sensor is suitable for use in all
establishments, including domestic establishments
and those directly connected to the public low-
voltage power supply network that supplies buildings
used for domestic purposes.
Electromagnetic environment
Page 9 of 20