Installer; Unpacking The Product; Handling - Riello 7200.200 V PLUS Installation, Operation And Maintenance Manual

INSTALLER

10 UNPACKING THE PRODUCT

MODELS 7200 V Plus 200 to 550
R 7200 V Plus storage cylinders are delivered in a single
package, protected by a cardboard box on a wooden pallet.
The following items are delivered in a plastic bag inside the
packaging:
− Instruction manual
− Certificate of warranty and label with bar code
− Spare parts catalogue
− Hydraulic test certificate
H
MODEL
200
300
430
550
MODELS 7200 V Plus 800 - 1000
R 7200 V Plus storage cylinders are delivered in a single
package, protected by a plastic bag inside a protective foam
rubber wrapping and supported by a wooden pallet.
The following items are delivered in a plastic bag inside the
packaging:
− Instruction manual
− Warranty certificate and barcode label
− Spare parts catalogue
− Hydraulic test certificate
− 4 adjustable feet
9
The second anode for installation instead of the inspection
flange is supplied separately and must be fitted by the
installer. The first anode comes pre-installed in the top
flange (vertical position).
9
The instruction manual is an integral part of the solar storage
cylinder. Once located, read it thoroughly and keep it safe.
A
B
A B H
700 700 1480
700 700 1980
850 850 1790
850 850 2130
H
MODEL
800
1000

11 HANDLING

MODELS 7200 V Plus 200 to 550
Weight
Make sure that any lifting equipment is of adequate capacity to
(Kg)
lift and move the storage cylinder.
95
Remove the brackets (1) to free the storage cylinder.
To lift the storage cylinder, remove the plug (2) and screw an
125
eyebolt (Ø 3/4") of suitable capacity for the weight of the cylinder
175
into the hole (3).
195
Fit the feet provided into the holes in the bottom of the storage
cylinder and adjust as necessary to compensate for any
unevenness in the floor.
11
A
B
A B H
1040 1040 2025
1040 1040 2350
2
1
1
1
INSTALLER
Weight
(Kg)
225
260
3
Installer