User Settings
If no button
operation is made
for approximately 10
seconds, the OSD will
be closed automatically.
38
English
On Screen Display (OSD)
The Projector has a multilingual On Screen Display that allows
you to make image adjustments and change a variety of settings
How to operate the OSD
1.
To open the OSD, press "Menu" on the Control Panel or Remote
Control.
2.
When OSD is displayed, use
main menu. While making a selection on a particular page, press
or "Enter" key to enter sub menu.
3.
Use
keys to select the desired item in the sub menu and press
or "Enter" key to view further settings. Adjust the settings by
using
key or
4.
Select the next item to be adjusted in the sub menu and adjust as
described above.
●
When there is no next menu in the submenu, press the
buttons to set related options.
● When there is a next menu in the submenu, the screen will
display the icon
options. If the next submenu contains option settings, press
the "ENTER" button to proceed with the next submenu option
setting (as above).
5. Press the "MENU" button to return to the previous menu setting.
6. Press the
buttons to change or adjust the setting and press
"ENTER" button to confi rm the change.
7. After exiting, press the "MENU" button again, the OSD will close, and the
projector will automatically save the new settings.
Main-menu bar
keys to select any item in the
key.
buttons to set related
. Press the
Submenu bar
Setting bar