Table of Contents
Advertisement
Sealants And Lubricants
TYPE
646943 - Anti Seize Lubricant
or
Loctite Anti-Seize Lubricant 767
TYPE
Approved, Clean, 50 Weight
Ashless Dispersant Oil
Approved Clean Break-In Oil
CHAMPION® - Spark Plug
Thread Lubricant No. 2612
[CHAMPION® is a registered
trademark of Cooper Industries.]
WD-40 or Chesterton No. 4
Dow Corning® No. 4
3-10
Lubricants
SUGGESTED SOURCES
May be purchased through your
local TCM Distributor or For
Distributor information: Loctite
Customer Service @
Phone: 1-800-243-4874
Lubricants
SUGGESTED SOURCES
See Aviation Engine Oil Ashless
Dispersant Table
See Break-In Oil Table
For Champion Products Distributor
information:
Phone: 803-843-5400
Chesterton Technical Product
Information
Phone: (508) 469-6783
For Distributor information call 1-
800-248-2481, have state & city
information available
APPLICATION
All fuel injector nozzles (at cylinder
head)
Exhaust studs (nut end before
torquing)
Oil temp. control valve (Vernatherm)
All .3125 and larger studs unless
otherwise specified
All mechanical tach drive housing
threads not through to an oil source
Air reference fittings on all throtle
bodies
APPLICATION
Cylinder stud and through bolt
threads, crankcase stud threads,
connecting rod bolt and nut threads
and engine accessory stud threads
Crankshaft bearings, connecting rod
bearings, camshaft bearings,
tachometer gears and adapters,
accessory spur gear teeth, starter cone,
bushing and nut, starter adapter clutch
spring (ID & OD), sealing surface of
valve guide seals, pistons, piston pins
and piston rings, rocker arms, pivots,
valves and tappets, thrust washers and
o-rings, prop governor transfer collar
and sleeve, oil filter adapter seals
Spark plugs
Induction system hose connections
Spin-on oil filter rubber seals
Magneto adapter gaskets (both sides)
Gasket, governor pad (both sides)
Advertisement
Chapters
Table of Contents
