Siemens EX675LYV1E User Manual page 31

Home Connect
en
Symbol Function
Permitted.
‚
WLAN signal strength
•'ˆ
Not connected to home network (WLAN).
‹
Signal strength 1 (poor)
‚
Signal strength 2 (moderate)
ƒ
Signal strength 3 (good)
„
Connection to Home Connect server
•'‰
Not connected.
‹
Connected.
‚
* Basic setting
Notes
The setting is only displayed if the appliance is
•'ƒ
■
connected to the home network.
The setting is only displayed if the appliance
•'„
■
has once connected to a network.
The setting is only displayed if an update is
•'†
■
available.
The setting is only displayed if Customer
•'‡
■
Service is attempting to connect to the appliance.
You can end this at any time after granting access.
The and settings are only displayed if
•'ˆ •'‰
■
there is a connection to WLAN.
Deactivating WLAN
If WLAN is activated, you can use the Home Connect
functions.
Note:
In networked standby mode, your appliance requires
max. 2 W.
Touch the symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the symbol repeatedly until the
0
2.
setting appears.
‚ lights up on the cooking position display.
30
•'„
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.
Set the value on the control panel.
‹
3.
WLAN is deactivated and the
panel goes out.
Disconnecting from the network
D i s c o n n e c t i n g f r o m t h e n e t w o r k
You can disconnect your hob from the network at any
time.
Note:
If your hob is disconnected from the network, it is not
possible to operate it using Home Connect.
Touch the symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the symbol repeatedly until the
0
2.
setting appears.
„ lights up on the cooking position display.
Set the value on the control panel.
‹
3.
The appliance is disconnected from the home network
and the symbol on the control panel goes out.
D
Connecting to the network
C o n n e c t i n g t o t h e n e t w o r k
Touch the symbol for 4 seconds.
0
1.
Product information will be displayed.
Touch the symbol repeatedly until the
0
2.
setting appears.
lights up on the cooking position display.
‹
On the control panel
3.
set the "Connect automatically"
or the "Connect manually"
Follow the instructions in the section entitled
4.
"Automatic registration in the home network" or
"Manual registration in the home network".
symbol on the control
D
•'‚
•'‚
‚ value or
value.
ƒ