Flexplus Zone; Notes Regarding Cookware; Activation; Deactivating - Siemens EX675LYV1E User Manual

FlexPlus Zone

en
}FlexPlus Zone
T he hob has a FlexPlus cooking zone which is located
F l e x P l u s Z o n e
between the two flexible cooking zones and which
switches on in conjunction with the right- or left-hand
flexible cooking zone. This means that larger cooking
vessels can be used and better cooking results can be
achieved.
The FlexPlus cooking zone always switches on in
conjunction with one of the two flexible cooking zones.
It is not possible to activate these cooking zones
independently.

Notes regarding cookware

The cookware should be positioned centrally for good
thermal detection and distribution.
The cookware should cover the side hotplate and the
FlexPlus cooking zone.
Depending on the size of the cookware, the flexible
cooking zone can be activated as two independent
hotplates or as one hotplate:
Set down the cookware
16
Oblong cookware
Activate the flexible cooking zone as
two independent hotplates or as one
hotplate.
Large round cookware
Activate the flexible cooking zone as a
single hotplate.
The vessel must not cover the two
side cooking zones and the FlexPlus
cooking zone at the same time.
THE EASIEST WAY TO SELF-IMPORT APPLIANCES DIRECT FROM EUROPE.

Activation

Set down the cookware on the hotplate and make
1.
sure that it also covers the FlexPlus cooking zone.
Select the hotplate and the required heat setting. The
2.
hotplate and FlexPlus cooking zone indicators light
up.
1.
The flexible cooking zone is activated.
If the two hotplates next to the FlexPlus cooking
Note:
zone are covered by the cookware, the display in the
FlexPlus cooking zone flashes before the hob is
switched on.
To link the FlexPlus cooking zone to the corresponding
hotplate, lift up the cookware, select a heat setting and
then place the cookware back down.

Deactivating

Remove the cookware from the hotplate. The displays
go out.
This deactivates the FlexPlus cooking zone.
2.