Advertisement
Step 5
Installing the carburetor:
Step five; screw the cab back on to the
carburetor. Now you can attach the carb to the
manifold. You will need two 3/8" bolts and two
3/8" nuts. Now attach the air filter to carb with the
hose clamp. Stop once you feel the hose clamp is
snug on the carb.
GokartsUSA.com
HPO High Performance Option Installation
Step 6
Installing the gas tank:
Step 6; now that you have attached the
carburetor and the exhaust pipe, it's time to install
the gas tank again. Cut the piece of fuel line to
the correct length and attach it to the fuel tank
with two hose clamps. Now you can finally install
the fuel tank on to the engine. Bolt back the nuts
to the engine.
Fuel Line
Congratulation you have successfully
installed your HPO kit on to your
TitanTX200S.
Honda GX, Titan TX200S
7
Advertisement
