Advertisement
Step 3
Choke cover removal:
Step three; using the 3/8" socket and ratchet
remove the fuel lever and choke lever cover.
After the bolts have been loosened, move the fuel
lever and choke lever all the left so that both of
them are in the off position.
Use a 3/8"
socket with a
3/8" ratchet
GokartsUSA.com
You will need
to remove this
bolt in order to
take the cover
off
Fuel lever
and choke
cover
Stock
carbureto
r
HPO High Performance Option Installation
Step 4
Throttle-lever removal:
Step four; now it's time to take off the throttle
lever arm. The lever is attached to the engine
with 2 (5/16" bolts). Remove the spring and lift up
the lever (make sure that you do not remove the
governor or it will drop down into your engine
cylinder).
Step 5
Carburetor removal:
Step five; after the throttle lever has been
removed, you can now remove the carburetor
and set it aside for now. Now you see that there
are two 4.5" bolts. To remove them use a pair of
vice grips. Clamp down on the bolt with vice grip,
make sure that the vice grip is clamped on the
bolt at 1.5" in. Start applying pressure to remove
the bolt. Repeat the same process on the other
bolt.
Pull forward upon the
carb
Honda GX, Titan TX200S
Throttle lever arm
Twist to the left
4
Advertisement
