Titan PGD2875H Operator's Manual
  1. Manuals
  2. Brands
  3. Titan Manuals
  4. Engine
  5. PGD2875H
  6. Operator's manual

Titan PGD2875H Operator's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Operator's Manual
PGD2875H

Advertisement

Table of Contents
loading

Related Manuals for Titan PGD2875H

Summary of Contents for Titan PGD2875H

  • Page 1 Operator’s Manual PGD2875H...

  • Page 3: Table Of Contents

    Table of Contents Introduction......................2 Safety Warnings ....................3 Main Parts…………………………………………………………………………….4 Preparation for Use…………………………………………………………………5 Operating Instructions..................7 Service and Maintenance.................8 Troubleshooting....................12 Key Product Data……………………………………………………………………13 Parts Diagrams………………………………………………………………………14 Warranty......................17 Contact Info......................18...

  • Page 4: Introduction

    To register your Titan Post Driver, simply fill out and return the warranty registration card enclosed with your machine. The Honda warranty is separate from the Titan Post Drivers warranty and is subject to its own coverage conditions and responsibilities of ownership. You can find the Honda warranty included with your Honda operator’s manual.

  • Page 5: Safety Warnings

    Safety Warnings 1. Always follow proper operation and maintenance instructions. 2. Always use approved Personal Protective Equipment (PPE). Operators and all other persons in the immediate working area must wear protective equipment as well. Noise emitted from the machine while working can reach above 100 decibels, which can also harm others in close proximity. We recommend the following personal protective equipment: a.

  • Page 6: Main Parts

    Main Parts Part Name Part Name Part Name Oil Level Gauge Handle Starter Choke Valve Gas Tank Gas Cap Fuel Bubble Air Filter Positioning Sleeve Dampening Spring Handle Sleeve Grease Cap Hammer Case Serial No. Location Throttle Limit Screw Combination Switch Throttle Switch Stop Switch Piling Socket Sleeve...

  • Page 7: Preparation For Use

    Preparations For Use Installing Inner Pile Head If the inner pile head (#49) is not pressed on the shock (#43) at this time, you must slide the inner pile head inside the piling socket and match the small side with the shock. Tap the inner pile head a few times to make sure it is connected to the shock.
  • Page 8 Adding Engine Oil 1. Before the first use, add engine oil. THE OIL IS NOT FILLED WHEN THE POST DRIVER IS ASSEMBLED. Honda suggests adding less than 80 cm (2.7 US oz., 2.8 Imp. oz.), then checking. Add oil if required to fill to the bottom edge of the oil fill hole. Use 10W-30 oil. DO NOT OVERFILL. Always place the driver in the horizontal position to check oil the level.

  • Page 9: Operating Instructions

    Operating Instructions Starting 1. The Honda GX35 engine is inclinable, which means it can be stored and operated in any direction. BEFORE STARTING, the driver needs to be in the horizontal position for 5 minutes. 2. Before starting the post driver, press the transparent, semi-circle fuel bubble repeatedly until the carburetor is filled with fuel.

  • Page 10: Service And Maintenance

    Service and Maintenance Air Filter Maintenance After the driver has been used for some time, dirt and dust particles can block the flow of air, which will result in reduced power and increased oil consumption. It is necessary to clean the air filter regularly. The cleaning cycle is usually every 3 months or every 25 hours of operation.
  • Page 11 Spark Plug Maintenance If the spark plug has too much carbon deposit, it will result in poor engine performance. It is necessary to regularly maintain and adjust the spark plug every year or every 100 hours of operation. 1. Remove the spark plug as shown. 2.
  • Page 12 Lubrication of Gearbox and Impact Parts After 40 hours of use, open the gearbox cover, and add 75 Series Grease to the connecting rod to fully lubricate the machine as shown below.
  • Page 13 Maintenance Schedule This schedule is based on operating the post driver under normal conditions. Under more strenuous conditions, such as a dusty environment or long work hours, the maintenance cycle should be adjusted accordingly. Outlook Check (state, √ √ tightness of The Whole Machine screws) √...

  • Page 14: Troubleshooting

    Continue until all oil has been removed from the cylinder. *WARNING: Oil may shoot from the spark plug hole as you pull the starter rope. If these steps do not address your issue, call Titan Post Drivers at (702) 293-4262 for further assistance.

  • Page 15: Key Product Data

    Key Product Data Honda GX35 engine Engine Type Model PGD2875H LxWxH (inches) 25" x 10" x 13" Fuel 86 octane, unleaded gasoline or higher 35.8 cc Displacement Fuel Tank Volume 0.17 US gal 3.4 US oz Oil Capacity 30 lbs...

  • Page 16: Parts Diagrams

    Exploded View of PGD2875H Driver...
  • Page 17 Parts List and Exploded View of PGD2875H Driver Part Name Part Name Inner Hexagon Cylindrical-Head Screw Honda GX35 Engine M6×20 Driven Disk Cylinder Gaskets Inner Hexagon Cylindrical-Head Screw M5×12 Impact Connecting Rod Elastic Washer 5 Impact Piston Bearing Pressing Plate...
  • Page 18 Part Name Part Name Switch Handle Guide Piling Socket Sleeve Sleeve Connecting Thread Head Step Nut Handle Spring 38x27Xφ2.5 Handle Sleeve Handle Soft Sleeve Handle Nut Positioning Sleeve Handle Frame Handle Frame Soft Sleeve Inner Hexagon Cylindrical-Head Screw M6×40 Combination Switch...

  • Page 19: Warranty

    Warranty Titan Post Drivers will warrant to the original purchaser, who purchases the equipment in new condition and in its original packaging from an authorized dealer, that its gas-powered post driver will be free from defects in workmanship and materials for a period of one (1) year. This warranty period will commence on the date of retail purchase by the original purchaser.

  • Page 20: Contact Info

    Contact: Hours : Monday-Friday 8 AM to 5 PM CST Address : 713 E Austin Blvd, Nevada, MO 64772 Phone: (702) 293-4262 Email info@titanpostdrivers.com...
  • Page 21 Maintenance Records and Notes: ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------ ------------------------------------------------------------------...

Table of Contents