Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Chauvin Arnoux C.A 1110
Summary of Contents for Chauvin Arnoux C.A 1110
- Page 1 GB - User’s manual C.A 1110 Lux meter...
- Page 2 The product is declared recyclable following an analysis of the life cycle in accordance with standard ISO 14040. Chauvin Arnoux has adopted an Eco-Design approach in order to design this appliance. Analysis of the complete life- cycle has enabled us to control and optimize the effects of the product on the environment. In particular this appliance exceeds regulation requirements with respect to recycling and reuse.
-
Page 3: Table Of Contents
1.3. Spare parts ..................................4 1.4. Inserting the batteries ..............................5 2. PRESENTATION OF THE INSTRUMENT ..........................6 2.1. C.A 1110 ..................................6 2.2. Functions of the instrument ............................7 2.3. Function keys ................................. 7 2.4. On/Off key ..................................8 2.5. -
Page 4: First Use
1. FIRST USE 1.1. DELIVERY CONDITION C.A 1110 lux meter Supplied in a cardboard box with: „ three AA or LR6 alkaline batteries, „ one USB-micro USB cord, „ one multilingual getting started guide, „ one multilingual safety data sheet, „... -
Page 5: Inserting The Batteries
1.4. INSERTING THE BATTERIES Notches to hang up the instrument. Non-skid pads Magnet for attachment to a metallic surface. Battery compartment cover. „ Press the tab of the battery compartment cover and lift it clear. „ Withdraw the battery compartment cover. „... -
Page 6: Presentation Of The Instrument
2. PRESENTATION OF THE INSTRUMENT 2.1. C.A 1110 Spiral-wound cable used to remote the illumination sensor. Cover protecting the sensor (captive). Illumination sensor. Magnets used to secure the sensor to the measurement housing. C.A 1110 LUXMETER Backlit LCD display unit. -
Page 7: Functions Of The Instrument
2.2. FUNCTIONS OF THE INSTRUMENT The C.A 1110 is a lux meter. It is used to make illumination measurements from 0.1 to 200,000 lux, in the visible part of the spectrum, to the exclusion of electromagnetic radiation that is not visible (X rays, ultraviolet, infrared, microwaves, RF, audio frequencies, etc.). -
Page 8: On/Off Key
2.4. ON/OFF KEY A long press on the key switches the instrument on. A second long press on the key switches the instrument off when it is on. However, it is not possible to switch the instrument off when it is in record mode and is recording. If during start-up the instrument displays the screen shown opposite, it means that a recording session has been brutally interrupted by a power outage. -
Page 9: Use In Stand-Alone Mode
3. USE IN STAND-ALONE MODE The instrument can operate in two modes: „ the stand-alone mode described in this section, „ the record mode, in which it is controlled by a PC. This mode is described in the next section. 3.1. - Page 10 MIN/AVG/MAX MIN/AVG/MAX TIME MIN/AVG/MAX TIME TIME Fluo. Fluo. Fluo. MIN/AVG/MAX TIME Fluo. To exit from the MAX AVG MIN mode, long-press the MAX AVG MIN key. 3.2.3. MAP FUNCTION The MAP function is used to map the illumination on a surface or in a room. A long press on the MAP key activates the function.
-
Page 11: Recording The Measurements
For each map measurement, a file is created with all of the measurement points. This file can then be recovered for analysis. 3.3. RECORDING THE MEASUREMENTS „ A short press on the MEM key records the measurement and the date. „... -
Page 12: Use In Recording Mode
4. USE IN RECORDING MODE The instrument can operate in two modes: „ the stand-alone mode described in the previous section, „ the record mode, in which it is controlled by a PC. This mode is described below. 4.1. CONNECTION The device has 2 communication modes: „... -
Page 13: Bluetooth Link
4.4. BLUETOOTH LINK The instrument has a low-energy Bluetooth 4.0 link that requires no pairing. „ Activate Bluetooth on your PC. If your PC does not have a Bluetooth link, you can add a board or Bluetooth adapter connected to a USB port (see §1.2). Since Windows 7 does not manage low-energy Bluetooth, a specific USB/Bluetooth adapter must be used (see §1.2). - Page 14 4.5.2. DATE AND HOUR The Instrument menu lets you set the your instrument’s date and time. These cannot be changed while recording or when a recording session has been scheduled. By clicking , you can choose the date and time display formats. 4.5.3.
- Page 15 4.5.5. DISPLAY By clicking , then opening to the Luxmeter tab, you can modify the display of the measurements on the instrument in the same way as by pressing the SRC key, or the UNIT key. 4.5.6. READING THE RECORDS The Data Logger Transfer software lets you read the records made.
-
Page 16: Technical Characteristics
The illumination sensor is a silicon (Si) photodiode of which the spectral response is corrected by an optical filter. The directional response is ensured by a diffusing lens. The C.A 1110 is a class C lux meter per standard NF C-42-710. 5.2.1. ILLUMINATION MEASUREMENTS Specified measure- 0.1 to 200,000lx... - Page 17 The error on the spectral response of the sensor is equal to the area of the differences between the V(l) curve and the curve of the sensor. 5.2.4. VARIATION ACCORDING TO THE TYPE OF LIGHT SOURCE The C.A 1110 provides 3 measurement compensations: „ Illuminant A (default). „ LED at 4000°K „...
-
Page 18: Memory
5.3. MEMORY The size of the flash memory containing the records is 4 MB. This capacity is sufficient to record a million measurements. At each measurement, the illumination is recorded with the date, the time and the unit. 5.4. USB Protocol: USB Mass Storage Maximum transmission speed: 12 Mbit/s Type B micro-USB connector... -
Page 19: Mechanical Characteristics
5.8. MECHANICAL CHARACTERISTICS Dimensions (L x W x H) Housing 150 x 72 x 32 mm Sensor 67 x 64 x 35 mm with the protecting cap Spiral-wound cable 24 to 120 cm Mass 345 g approx. Inrush protection IP 50, with the USB connector closed and the protecting cap on the sensor, per IEC 60.529. Drop impact test 1 m per IEC 61010-1. -
Page 20: Maintenance
See you on our site: www.chauvin-arnoux.com Then go to “Support”, then “Download our software”, then “C.A 1110”. Updating the embedded software may reset the configuration and cause the loss of the recorded data. As a precaution, save the data in memory to a PC before updating the embedded software. - Page 21 Embedded software update procedure „ Download the .bin file from our web site, then press and hold the MEM key and switch the instrument on by pressing the key. The instrument displays BOOT. „ Release the keys and the instrument displays COPY, indicating that it is ready to receive the new software. „...
-
Page 22: Warranty
7. WARRANTY Except as otherwise stated, our warranty is valid for 24 months starting from the date on which the equipment was sold. Extract from our General Conditions of Sale provided on request. The warranty does not apply in the following cases: „... -
Page 23: Appendix
8. APPENDIX 8.1. ILLUMINANTS The instrument handles 3 types of illumination source: „ natural or incandescent - illuminant A defined by standard NF C-42-710 „ fluorescent tubes with three narrow bands, or F11 „ LEDs at 4000K. 8.1.1. CURVE OF ILLUMINANT A Standardized spectral distribution Wavelength (nm) 8.1.2. -
Page 24: Illumination Values
8.1.3. CURVE OF THE LED ILLUMINANT Standardized spectral distribution Wavelength (nm) 8.2. ILLUMINATION VALUES Total darkness Outdoors at night 2 to 20lx Production plant without manual operations 50lx Passageways, stairs and corridors, warehouses 100lx Dock and loading areas 150lx Changing rooms, cafeteria, and sanitary facilities 200lx Handling, packaging, and dispatching areas 300lx... - Page 26 FRANCE INTERNATIONAL Chauvin Arnoux Group Chauvin Arnoux Group 190, rue Championnet Tél : +33 1 44 85 44 38 75876 PARIS Cedex 18 Fax : +33 1 46 27 95 69 Tél : +33 1 44 85 44 85 Fax : +33 1 46 27 73 89 Our international contacts info@chauvin-arnoux.com...