Troubleshooting - Sansui HDLCD1900A Owner's Manual

Troubleshooting
Use the following checklist for troubleshooting if you have problems with your LCD -IV. Consult your local dealer
or service outlet if problems persist. Be sure all connections are properly made when using with other units.
%YMPTOMS
TV does not
operate.
Poorsound
or no sound.
Poor picture
or no picture.
Poor
reception on
some
channels.
Poor color or
no color.
Picture
wobbles or
drifts.
Digital
broadcasting
screen
,problem.
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back
in.
• Station or Cable TV experiencing
problems, tune to another station.
• Check sound adjustments (Volume and
Mute).
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
• Check picture control adjustments.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to
receive desired station.
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
• Station or Cable TV experiencing
problems, tune to another station.
• Make sure channels are set into memory.
• Cable TV company is scrambling signal.
• Adjust antenna.
• Check digital signal strength.
rSYMPTOMS
No CATV
reception.
Horizontal or
diagonal bars
on screen.
No reception
above
channel 13.
No Remote
operation.
TV shuts off.
Closed -
Caption is not
activated.
TVis not
shownin your
_anguage.
POSSIBLE SOLUTIONS
• Check all Cable TV connections.
• Set Air/Cable menu option to the Cable
mode.
• Station or Cable TV system problems,
try another station.
• Check antenna connections, adjust or
re-direct antenna.
• Check for sources of possible
interference.
• Make sure SignalType option is in the
appropriate mode.
• If using antenna, check UHF antenna
connections.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to
TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions
between the Remote and the TV.
• Make sure the power cord is plugged in.
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
• Check Cable TV connection or VH FiUHF
antenna, reposition or rotate antenna.
• Set closed caption decoder in the menu.
• Selectproperlanguageinthe menu
options.
I
NSUI
FOR CUSTOMER SERVICE, ADDITIONAL SETUP OR OPERATING ASSISTANCE PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE - PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC,
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT
www.orionsalesinc.com
26