Troubleshooting - Sansui SLED1980 Owner's Manual

Troubleshooting
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer
or service outlet if problems persist. Be sure all connections are properly made when using with other units.
rSYMPTOMS
TV does not
operate.
Poor sound
or no sound.
Poor picture
or no picture.
Poor
reception on
some
channels.
Poor color or
no cotor.
Picture
wobbles or
drifts.
POSSIBLE SOLUTIONS •
• Make sure the power cord is ptugged in.
• Try another AC outlet.
• Power is off, check fuse or circuit breaker.
• Unptug unit for an hour, then ptug it back
in.
• Station or CabteTVexperiencing
problems, tune to another station.
• Check sound adjustments (Volume and
Mute).
• Check for sources of possibte
interference.
• Station or CabteTVexpedencing
problems, tune to another station.
• Make sure channels are set into memory.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possible
interference.
• Check picture control adjustments.
• Station or CabteTVexpedencing
problems, tune to another station.
• Make sure channels are set into memory.
• Station is weak, adjust antenna to
receive desired station.
• Check for sources of possibte
interference.
• Station or CabteTVexpedencing
problems, tune to another station.
• Make sure channels are set into memory.
• Check picture control adjustments.
• Check antenna or Cable TV
connections, adjust antenna.
• Check for sources of possibte
interference.
• Station or CabteTVexpedencing
problems, tune to another station.
Make sure channels are set into memory.
Cable TV company is scrambling signal.
, Adjust antenna.
BLOCK NOISE / PICTURE FREEZE
_SYMPTOMS
Digital
broadcasting
screen
problem.
POSSIBLE SOLUTIONS •
No Remote
operation.
TV shuts off.
Closed -
Caption is not
activated.
• Check digital signal strength.
• Check att Cable TV connections.
No CATV • Set Air/Cable menu option to the Cable
mode.
reception. • Station or Cable TV system problems,
try another station.
Horizontal or • Check antenna connections, adjust or
re-direct antenna.
diagonal bars • Check for sources of possible
on screen, interference.
No reception • Make sure Signal Type option is in the
above appropriate mode.
channel 13. • If using antenna, check UHF antenna
connections.
• Batteries are weak, dead or inserted
incorrectly.
• Remote is out of range, move closer to
TV (within 15 feet).
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions
between the Remote and the TV.
• Make sure the power cord is plugged in.
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or
program tuned is not closed captioned.
Try another channel.
• Check Cable TV connection or VH F/UH F
antenna, reposition or rotate antenna.
• Set closed caption decoder in the menu.
TV is not
shown in your
_language.
• Select proper language in the menu
options. ,_
Block noise or picture freeze may appear on the screen caused by weak signals, interference from automobile
ignition systems, neon lamps or AC powered tools and appliances such as drills or hair dryers.
l, lrSANSU I®
FOR CUSTOMER SERVICE, ADDITIONAL SETUP AND OPERATING ASSISTANCE, OR TO ORDER ACCESSORIES PLEASE CALL:
1-800-289-0980
WHEN CALLING CUSTOMER SERVICE- PLEASE HAVE YOUR MODEL NUMBER READY
OR WRITE TO:
ORION SALES, INC.
3471 N. UNION DR.
OLNEY, ILLINOIS 62450
FOR INFORMATION ON OUR OTHER PRODUCTS, OR TO ORDER ACCESSORIES ONLINE, PLEASE VISIT OUR WEBSITE AT
www.orionsalesinc.com
25