Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your
antenna system. If you are using a Cable TV service, see page 11 for Cable TV connections.
Combination
VHF/UHF
Antenna
(Single
75 ohm cable or 300 ohm twin-lead
wire)
r
Antenna
Jack
_
75 ohm
Coaxial
Cable
Antenna
300-75 ohm
Matching
Transformer
Connect the 75 ohm cable from the combination
VHF/UHF antenna to the antenna jack.
If your combination VHF/UHF antenna has a 300
ohm twin-lead wire, the use of the 300-75 ohm
matching transformer may be necessary.
J
Combination
VHF/UHF
Antenna
(Separate
VHF and UHF 300 ohm twin-lead
wires)
Antenna
Jack
300-75 ohm Matching Transformer
/
VHF 300 ohm
Ilil
RInK
-
_00
ohm
Combiner
Connect the UHF 300 ohm twin-lead wire to
the Combiner (not supplied). Connect the VHF
300 ohm twin-lead wire to the 300-75 ohm
Matching Transformer. Attach the Transformer to
the Combiner, then attach the Combiner to the
Antenna Jack.
Separate
VHF/UHF
Antennas
(75 ohm VHF cable and 300 ohm UHF twin-lead
wires)
r
VHF 75 ohm
Antenna
Jack
Combiner
Connect the VHF 75 ohm cable and UHF 300 ohm
twin-lead wire to the Combiner (not supplied).Attach
the Combiner to the Antenna Jack.
k.
J
10