Engine Shutdown; Priming Time Requirement - Continental Motors TSIO-520-BE Maintenance And Operator's Manual

6-15 ENGINE SHUTDOWN
If boost pump has been on for landing, turn to "OFF".
2. Place mixture control in "IDLE CUTOFF".
3. Turn magnetos "OFF" after propeller stops rotating.
If)
0
z
0
u
w
"'
24
20
16
4
Extrapolated areas
are unexplored
Time predicated on fuel boost
pump capability of providing
16
to
19 gallons per hour through
the engine fuel system at
wide open throttle full rich
mixture engine stopped
Priming to be done with wide open
throtUe · fu'l rich mixture
At
temperatures above +20°F
discontinue priming before
cranking
At temperatures of + 20°F
and betow,
continue
priming
while cranking
!
-20
0
+20 40 60
80
TEMPERATURE °F AMBIENT
FIGURE 6-1. PRIMING TIME REQUIREMENT.
6-8