Cylinder Heating Stand 8156; Blind Needle Bearing 8093C; Puller; Starter Clutch Shaft - Continental Motors TSIO-520-BE Maintenance And Operator's Manual

Cylinder Heating Stand 8156
In just 8-10 minutes, you can heat 2 cylinders
simultaneously to
600°F.
Or, you can heat one
at
a time (each tip is separately controlled).
Included with the 8156 Cylinder Heat Stand:
(2} Tips
(2) 36" Propane Hoses
w
/fittings
(1)
Propane Regulator
(2)
Controls
(1)
Y-Connector
(1)
Stand
(2) Cylinder Risers
All
screws, nuts and washers needed: and (';;\
instructions.
~
Blind Needle Bearing 8093C
Puller
Use to remove 5/8" l.D. needle bearings in 470
and 520 Series engines. Use with 8054 Slide
~ 46
Hammer.
~
Starter Clutch Shaft
Bearing Pullers
80930
for removing 3/4" l.D. bearings.
Controls
Y-Connector
Regulator
Standaro
20 lb. Propane Tank
Use with 8054 Slide Hammer