Dtmf Functions - Midland CT3000 Instruction Manual

DTMF functions

CT3000 can store up to 16 DTMF codes with 16 digits.
The DTMF code memories can be changed with the optional programming
software.
Transmitting a DTMF code
1. Keep pressed PTT.
In tx mode press the controls corresponding to your DTMF code. You will
2.
hear the code from the speaker of the radio.
Transmitting a memory DTMF code
This function is enabled only if you set your DTMF code by means of the pro-
gramming software.
Select the desired customised DTMF code
1.
2. Access the radio menu and follow these steps:
3. MENU DTMF MENUCALL
Select the desired DTMF code and confirm with the main knob.
4.
5. Press the control associated to the CALL function (previously set in
HAND KEY menu)
Changing a memory DTMF code and the tx time of
DTMF codes
These functions can be enabled by means of the optional programming soft-
ware.
Selective calls with DTMF codes
CT3000 can answer selective calls and open the squelch only in case you re-
ceived a call with your DTMF code (DTMF ID or 5 Tone ID).
This function can be enabled through the programming software.
Note: DTMF settings can be changed only with the optional programming sof-
tware.
22 | Midland CT3000 instruction guide