Siemens RDF110 Manual page 9

Equipment combinations
Accessories
Ordering
Mechanical design
Setting and operating
elements
9/14
Siemens
Building Technologies
Type of unit
Infrared remote control
Cable temperature sensor
Room sensor
Changeover mounting kit
Electromotoric on / off valve and actuator
Electromotoric on / off actuator
Thermal actuator (for radiator valve)
Thermal actuator (for small valves 2.5 mm)
Zone valve actuators
(only available in AP, UAE, SA and IN)
*) The documents can be downloaded from http://siemens.com/bt/download.
Description
Adapter plate 120 x 120 mm for 4" x 4" conduit boxes
Adapter plate 96 x 120 mm for 2" x 4" conduit boxes
Adapter plate for surface wiring 112 x 130 mm
When ordering, please prodive name and type:
E.g. room temperature controller RDF110
The IRA210 infrared remote control is to be ordered as a separate item
The QAH11.1 can be used as a return air temperature or automatic heating / cooling
changeover sensor. In case it is used as a changeover sensor, the ARG86.3
changeover sensor mounting kit is to be ordered as a separate item.
Valve actuators are to be ordered as separate items.
The controller consists of two parts:
• Plastic housing which accommodates the electronics, the operating elements and the
built-in room temperature sensor
• Mounting base
The housing engages in the mounting base and snaps on.
The base carries the screw terminals.
Room Temperature Controllers
Type Data Sheet
IRA210 -
QAH11.1
1840
QAA32 1747
ARG86.3
1840
MVI.../MXI... 4867
SFA21... 4863
STA21...
4893
STP21... 4878
SUA... 4830
Type
ARG70
ARG70.1
ARG70.2
N3057en
2014-10-28
*)