MORryde TV20-001H Installation Instructions

Television mounts

Hardware for mounting television: Refer to your television's owners manual or select the appropriate bolt from the hardware provided.

M5 Lock Washer (6)

M6 Lock Washer (6)

M6x12mm Bolt (4)

M4 Lock Washer (6)

M4x12mm Bolt (4)

M5x12mm Bolt (4)

M6x35mm Bolt (4)

M4x30mm Bolt (4)

M5x30mm Bolt (4)

M4/M5

#10 Washer (6)

M4/M5 Spacer (4)

M6 Spacer (4)

M8x35mm Bolt (4)

M8x12mm Bolt (4)

M8 Lock Washer (6)

Optional*

*Spacers are for televisions with recessed mounting holes.

Hardware for securing bracket: Select the appropriate length based on the thickness of your mounting surface.

< best for metal applications >

< best for wood applications >

1/4" x 1" Self-drilling Screw (8)

1/4" x 1" Lag Bolt (8)

1/4" x 1-1/2" Lag Bolt (8)

1/4" ID Washer (8)

MOR/ryde International ▪ 1966 Moyer Ave ▪ PO Box 579 ▪ Elkhart ▪ IN 46516

Customer Service: 574-293-1581 ▪ www.morryde.com

Table of Contents

Need help?

Do you have a question about the TV20-001H and is the answer not in the manual?

Page 1 1/4” x 1” Self-drilling Screw (8) 1/4” x 1” Lag Bolt (8) 1/4” x 1-1/2” Lag Bolt (8) 1/4” ID Washer (8) MOR/ryde International ▪ 1966 Moyer Ave ▪ PO Box 579 ▪ Elkhart ▪ IN 46516 Customer Service: 574-293-1581 ▪ www.morryde.com...
Page 2 STEP 1 Secure the wall bracket to mounting surface: Pre-drill holes using a 1/8” drill bit for use with 1/4” lag bolts. Use lag bolts or self drilling screws (depending on your mounting surface) with 1/4” washers to secure base of bracket to the mounting surface.