Advertisement
Soft Top Installation:
Fig 5
Fig 7
Step 1B: Remove Existing Top Fabric
Detach your old Soft Top Fabric from
the Header. For Model Years 2010-2018
Only: You will need to peel back the
corner foam and unscrew the cable
attachment on both ends of the header
using a T-15 Torx.
Fig 6
Fig 8
For Model Years 2007-2009 Only:
You will need to peel back the foam
and remove the two corner screws
that hold a plastic mounting flange
located in the same vicinity.
See Figs 5, 6, 7 & 8.
The following header installation will be easier to accomplish with the
help of another person. This step will most likely be the most difficult
step in the install and you should take your time. The easiest way to
install this header is standing on the front seats facing forward.
We suggest placing a towel or cover on the seats to protect them from
dirt and debris from your shoes. Once the soft top header fabric is
installed in the factory header, the remaining installation should be
very straight forward.
The Trusted Source
4
®
Advertisement
