Advertisement
Soft Top Removal:
If no previous soft top is present, skip to page 5
Fig 1
Remove Quarter
Windows
Fig 3
Remove
Header
Screws
Remove 19 or 27 Screws
(Model year Dependent)
Step 1A: Remove Existing Top Fabric
Remove your existing Soft top Fabric.
After verifying that you have the correct
factory original bow system and hard-
ware, remove the existing soft top from
the vehicle. This process will entail re-
moving all Quarter windows, unscrew-
ing the top from the rear bows and
removing the fabric from the windshield
header by unscrewing 19 or 27 header
For a smooth fit and ease of installation, this top should be installed
at temperatures above 72 degrees. Below this temperature, the fabric
may contract an inch or more making it difficult to install. We highly
recommend taking the top out of the package and letting it sit inside
a warm place or direct sunlight for 1-2 hours before you install the top.
When warm, this top will install quickly.
Please also note that it is normal for fabric to contract and wrinkle
when stored in the shipping carton. In a few days the fabric will relax
and wrinkles will disappear.
Fig 2
Fig 4
screws (Depending on model year). See
Step 1b on next page for proper removal
of header fabric. Make sure you keep all
screws and fasteners in a safe place
after removal. You will be using them
again later in the installation.
See Figs 1, 2, 3 & 4. Once the soft top is
removed, inspect all of your hardware to
make sure no parts are bent or missing.
The Trusted Source
3
Remove Bow
Remove Header
Corner Screws
®
Screws
Advertisement
