Compaq AlphaServer ES40 Installation Manuals page 25

CAUTION: If you are installing a cabinet that does not have the interlock
system, you must ensure cabinet stability by installing rack
stabilizing feet or by some other means.
1. At the back of the cabinet, release the vertical bar
2. Insert the stabilizer bracket
bar so that the actuator latch is above the stabilizer bracket.
3. Reinstall the vertical bar.
4. Secure the stabilizer bracket to the two remaining marked holes on the
right cabinet rail with two hex screws
5. Vertically position the actuator latch
the system aligns with the actuator latch.
6. Rotate the actuator latch to orient it like the other actuator latches on the
vertical bar.
7. Tighten the Allen screws
H9A10 Four-System Configuration
A pin in the actuator latch is provided for attaching the spring of the
interlock system. The pin is needed for the top system of a four-system
configuration in an H9A10 cabinet only. The vertical rod
trimmed.
and the actuator latch
. Tighten into the nut bar
such that the trip mechanism
on the actuator latch.
Installing a System into a Cabinet
of the interlock system.
into the vertical
.
in
may need to be
17