Mounting; Orientation; Rigging - Chauvet DJ HURRICANE 1800 FLEX User Manual

Mounting

Orientation

Rigging

Mounting Diagram
Page 8 of 17
Before mounting the product, read and follow the safety recommendations indicated in
the Safety Notes.
This product may NOT be tilted. This product should be level when on a surface
or when mounted.
This product must be mounted horizontally, provided there is adequate room for
ventilation. The tank of the product should not move from this position. However,
the front portion of the fog machine can tilt up and down in the desired direction.
Use the adjustment knobs to secure the adjustable front portion.
• Before deciding on a location, always make sure there is easy access to the product
for maintenance and fluid replenishment.
• Make sure that the structure or surface onto which you are mounting the product
can support the product's weight (see the
When mounting the product, ALWAYS use a safety cable. Mount the product
•
securely to a rigging point, such as an elevated platform or a truss.
• When rigging the product onto a truss, you should use a mounting clamp of
appropriate weight capacity. The bracket has 13-mm holes, which are appropriate
for this purpose.
The rubber feet also serve as floor supports and allow for surface mounting. When
•
mounting the product on the floor, make sure that the product and cables are away
from people and vehicles.
Mounting
Bracket
Bracket Adjustment
Knob (2x)
Mounting Clamp
(such as CLP-15 or
CLP-15N clamp from
Chauvet)
Technical
Safety Loop
Angle Adjustment Knob (2x)
Hurricane 1800 Flex V2 User Manual Rev. 2
Specifications).
Angle
Adjustment
Handle
Nozzle
Safety Cable
(works with CH-05 from
Chauvet)