Operation; Control Panel Operation; Menu Map; Dmx Linking - Chauvet DJ HURRICANE 1800 FLEX User Manual

Fogger with remote
Hide thumbs Also See for HURRICANE 1800 FLEX:
Table of Contents

Advertisement

4. O
PERATION
Control Panel

Operation

Menu Map

DMX Linking

Configuration
(DMX)
DMX Starting
Address

DMX Channel Assignments and Values

Channel

1-CH

Note: Fog output is variable, depending on the status of the heater and environment.
Page 10 of 17
To access the control panel functions, use the four buttons located underneath the
display. Please refer to the
panel.
Button
<MENU>
Press to exit from the current menu or function
<UP>
Press to scroll up the list of options or to find a higher value
<DOWN>
Press to scroll down the list of options or to find a lower value
<ENTER>
Press to activate a menu option or a selected value
Mode
Programming Steps
DMX Mode
Addr
Temperature
Ht
The Hurricane 1800 Flex works with a DMX controller. Information about DMX is in the
CHAUVET®
DMX
Primer,
http://www.chauvetlighting.com/downloads/DMX_Primer_rev05_WO.pdf.
Set the product in DMX mode to control with a DMX controller.
1.
Connect the product to a suitable power outlet, and turn the power switch to on.
2.
Connect a DMX cable from the DMX output of the DMX controller to the DMX input
socket on the product.
When selecting a starting DMX address, always consider the number of DMX channels
the selected DMX mode uses. If you choose a starting address that is too high, you could
restrict the access to some of the product's channels.
The Hurricane 1800 Flex uses 1 DMX channel, which defines the highest configurable
address as 512.
If you are not familiar with the DMX protocol, download the DMX Primer from
www.chauvetlighting.com.
To select the starting address, do the following:
1.
Press <MENU> repeatedly until Addr shows on the display.
Press <ENTER> and d 1–d512 will show on the display.
2.
3.
Use <UP> or <DOWN> to select the starting address.
4.
Press <ENTER>.
Function
Fog Output
1
Product Overview
to see the button locations on the control
Function
Sets DMX starting address
d 1–d512
t _ _
Displays current heater temperature
which
is
available
Value
000005
No function
006255
0–100%
Hurricane 1800 Flex V2 User Manual Rev. 2
Description
from
the
Chauvet
website
Percent/Setting

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents