Optional Wired Manual Remote Control (Fc-M); Optional Wireless Remote (Fc-W); Fluid Tank Indicator Lights; Heater Temperature - Chauvet DJ HURRICANE 1800 FLEX User Manual

Optional Wired
Manual Remote
Control (FC-M)
FC-M Manual Remote
Control Overview
Optional
Wireless Remote
(FC-W)
FC-W Wireless
Remote Overview
Fluid Tank
Indicator
Lights
Heater
Temperature
Page 12 of 17
The optional FC-M wired manual remote control allows the user to start and stop the fog
output. It operates the same as the Manual button on the product, with the addition of a
READY indicator LED.
1. Plug in the fog machine to power.
2. Plug in the wired manual remote control to the Manual Remote Connector socket on the
back of the fog machine. (See the product Overview.)
3. Wait for the READY indicator LED to light up, indicating the Hurricane 1800 Flex is
heated enough to produce fog. (Also see
4. Press and hold the <FOG> button on the wired manual remote control.
Release the <FOG> button to stop the fog output.
5.
The Hurricane 1800 Flex unit may start producing fog intermittently to allow for fluid
•
reheating after a period of continuous fog output. This is a normal occurrence.
• The duration of manual fog output is based on the capability of the fog machine.
The optional FC-W wireless remote allows the user to trigger the Hurricane 1800 Flex to
produce fog from up to 100 ft away.
1. Plug in the fog machine to power.
2. Plug the FC-W wireless remote receiver into the Wireless Remote Connector on the back
of the Hurricane 1800 Flex. (See the product Overview.)
3. Allow the Hurricane 1800 Flex three to four minutes to heat up.
Lights.)
4. Press and hold the <1>, <2>, <3>, or <4> button on the wireless remote. (Download the
FC-W User Manual from
the FC-W)
5. Release the button to stop the fog output.
Ensure the FC-W has an unobstructed view of the receiver for maximum
•
performance.
• The <2>, <3>, and <4> buttons are reserved for future use.
The Hurricane 1800 Flex has indicator LEDs that light up the fluid tank to indicate the
status of the product, as follows:
Red - The heater is currently warming up.
•
• Flashing Red - The heater is currently warming up and no fluid is detected.
Blue - The heater is ready to produce fog.
•
• Flashing Blue - The heater is ready to produce fog and no fluid is detected.
To view the current heater temperature, follow the instructions below:
Press <MENU> repeatedly until Ht shows on the display.
•
• Press <ENTER> and t_ _ _ (the current heater temperature) will show on the
display.
Fluid Tank Indicator
www.chauvetlighting.com for more information on addressing
Hurricane 1800 Flex V2 User Manual Rev. 2
Lights.)
(See Fluid Tank Indicator