Replacing The Door Led Lights; Setting Up Power Cord Holder - IDW G-10F Instruction Manual

REPLACING THE DOOR LED LIGHTS

1
Unplug the cooler.
SETTING UP SPACER & POWER CORD HOLDERS
8
2
Remove
plastic
cover.
4
Disconnect
middle light
strand.
6
Remove entire light strand.
7
To install LED lights follow the above instructions in reverse order.
Notes: If there are any malfunctions with the main control panel of LED lights,
please contact a professional for replacement.
The G-10f/GCG-10f is supplied with one set (2 pieces) of Spacers to hold the
extra length of Power Cord
1
Take out the two Spacers and screws supplied in the Accessory Pack shipped with
the Cooler.
2
G-10f/GCG-10f
5
Use a Phillips screwdriver to secure the two Spacers onto the
rear of the cooler.
3
Disconnect top
light strand.
Unscrew light strand.
Innovative DisplayWorks