Table of Contents
Advertisement
5
Replacing the fan tray
4. Lock the power supply in place by securing the two captive screws as shown in
FIGURE 20
5. Connect the power cord to the power supply.
FIGURE 21
6. Power on the supply and verify that it is working properly as instructed in
Replacing the fan tray
You can replace the fan tray while the TurboIron 24X is powered on and running. The fan tray is
located in a slot at the rear of the TurboIron 24X.
This section provides information about the following topics:
•
•
46
Securing the power supply in the device
Connecting the power cord
system"
on page 18 and
"Verifying proper operation"
Installation precautions and warnings
Replacing the fan tray
on page 19.
Brocade TurboIron 24X Series Hardware Installation Guide
Figure
20.
"Powering on the
53-1001378-01
Advertisement
Table of Contents
