Replacing The Rear Brake Pads (990 Super Duke/R) - KTM 990 Adventure Repair Manual

10-7
1
3
Replacing the rear brake pads (950/990 Adventure, 950 Supermoto/R,
990 Supermoto)
– Press the brake caliper towards the rear sprocket to move the brake
piston into the basic position. Remove the retainers
bolt and remove the brake pads. Thoroughly clean the brake
2
caliper with compressed air and check the guide bolt bellows for
damage.
– Slide the left brake pad into the brake caliper and fix with the bolt.
2
Slide in the right brake pad and push the bolt
brake caliper. Mount the retainers
– K
EEP THE BRAKE DISK FREE OF OIL AND GREASE OTHERWISE THE BRAKING
ACTION WILL BE SIGNIFICANTLY REDUCED
– A
FTER MOUNTING
– A
FTER WORKING ON THE BRAKE SYSTEM
BRAKE LEVER TO PRESS THE BRAKE PADS AGAINST THE BRAKE DISK UNTIL YOU
FEEL THE PRESSURE POINT

Replacing the rear brake pads (990 Super Duke/R)

– Press the brake caliper towards the rear sprocket to move the brake
piston into the basic position. Remove the retainer
bolt from the outside towards the rim.
4
– Remove the brake pads. Thoroughly clean the brake caliper with
compressed air and check the guide bolt bellows for damage.
– Slide the left brake pad into the brake caliper and fix with the bolt.
Slide in the right brake pad and push the bolt
brake caliper.
4
– Knock in the bolt towards the outside from the rim until the retainer
can be mounted.
3
– K
EEP THE BRAKE DISK FREE OF OIL AND GREASE OTHERWISE THE BRAKING
ACTION WILL BE SIGNIFICANTLY REDUCED
– A
FTER MOUNTING
– A
FTER WORKING ON THE BRAKE SYSTEM
BRAKE LEVER TO PRESS THE BRAKE PADS AGAINST THE BRAKE DISK UNTIL YOU
FEEL THE PRESSURE POINT
.
1
! CAUTION
.
,
MAKE SURE THE RETAINERS ARE CORRECTLY POSITIONED
,
ALWAYS ACTUATE THE HAND OR FOOT
.
! CAUTION
.
,
MAKE SURE THE RETAINERS ARE CORRECTLY POSITIONED
,
ALWAYS ACTUATE THE HAND OR FOOT
.
, pull out the
1
all the way into the
2
!
.
, knock out the
3
all the way into the
4
!
.