Parameters; Addition Function Selection; Child Lock; To Cancel The Program Or Reselect The Options - Hisense HWFV8012 Quick User Manual

PARAMETER
HWFV8012/HWFV8012S/
Model HWFV8012T/HWFM8012/
HWFM8012S/HWFM8012T
Washing Capacity 8.0kg
Max.spin speed 1200rpm
Net Weight 60kg
Dimension(WXDXH) 595X595X850mm
Rated Voltage
220 -240V
Heating Power 1600W
Washing Power 200W
Add Detergent, Close the Door and Set the Program
Load the clothes to be washed in the drum and close the door.
Add the detergent into the relevant compartments for the type
of program you are going to select, Add detergent as described
in Detergent and Additives section of User's Operation
Manual.
1.Turn on the power.
2.Spin program selection button to required program, start up.
3.Select washing temperature, spin speed and delay time by pressing
"Temp.", "Spin" and " Delay End" buttons.
4.Press "Options" button to select additional functions.
5.After starting the program, display window displays program
length (hours: minutes)and additional function options in
sequence.

Addition function selection

At standby state, press "Options" button to select additional
function for current program. Select only one function for each
press, and then corresponding icon flashes. After starting up,
program cannot be changed.
Pre-wash
·Select the function to conduct pre-wash so as to enhance washing
effects and better remove stains. This function is suitable for
heavy dirt clothes.
·Before inflowing, laundry detergent/ washing powder can be
added to pre-wash box, and washing powder must be added to
main wash box.
Extra Rinse
After set the function of rinsing adding, the program runs the
rinsing process once again before running the softening, and
the total running time of the program increases accordingly.
Door Lock Icon
After the program starts the Door Lock icon will light up
and the door will be locked.
·After completing program, door lock unlocks automatically.
During pause, if door opening condition can be met halfway,
the door lock will unlock and its indicator light will go out.
·When door lock indicator light flashes, door shall not be opened
forcibly so as to avoid personal injury.
Delay End Function
Delay function allows to run the machine at the consumers'
convenience, for example, at night when electricity is cheaper.
•Only under the standby mode, this button is valid for
selecting the reservation time.
•After the reservation function is selected, the time will
increase 1h when each time the reservation button is pressed.
Before reservation, if the program time does not satisfy the
integral multiple of 1h, it shall be completed by pressing the
reservation key for the first time, and then the time increases
1h when each time the reservation button is pressed. If the
reservation is selected, before the program runs, the current
reservation can be canceled by turning the button to select
other programs.
•The delay time must be longer than the wash program length
as the delay time is the time program will finish. For example:
if the selected program time is 02:28, the delay time selected
must be between 03:00 and 24:00.
•When the reservation process is operated, the icon of
'reservation time' will be on. When the reservation process
is finished, the icon of 'reservation time' will be off, while
the icon of the 'remaining time' will be on.
Mute Function
•Press "Spin" and "Delay End" button simultaneously for 2
seconds, the screen will show "bEEP OFF". The Mute state
will be set. In this state, all the beep will be disabled, except
for the error alarm.
•Repeat the same process, Mute state will be disabled, the
screen will show "bEEP On".
•The Mute function will continue to take effect before you
turn it down manually.

Child Lock

To strengthen the safety of children, this machine is equipped
with Child Lock function.
•When the programme starts, press "Temp.+Spin"button
for 2 seconds. The machine will beep once. Scree will show
"SAFE On". After 2 seconds, the screen will show the
program left time. Repeat this operation, the machine will
beep once. The screen will show "SAFE OFF", the Child
Lock will be released.
•When the Child Lock is set, all function buttons except
"Off" will be shielded.Once any function except "Off" is
chosen, the machine will beep. The screen will show "
SAFE On" for 2 seconds. After the program ends, Child
lock function will release automatically. Any error alarm
will release the Child Lock function. Turn off and on the
machine manually will reset the machine.
•Child Lock function cannot be set when the machine is in
standby state.
To Start the Program
After you have selected your options and placed detergent
with in the detergent dispenser, turn on the water tap and press
the "Start / Pause" button. It also displays the remaining
program time.

To Cancel the Program or Reselect the Options

1.Rotate the program to "Off" for 3 seconds to turn off the
machine.
2.Select the new program and options.
3.Press "Start / Pause" button to turn on the machine without
adding any extra detergent.
End of the Program
When programme finished its running, it will display "End".
The machine will not turn off automatically.
1.Rotate the program to "Off" to turn off the machine;
2.Close the tap;
3.Open the door and take the washed clothes out;
4.Slightly open the door to remove moisture in the pump.
Reload in Process
If you want to reload clothes in the process of washing, please
press "Start/Pause" button.
•If the door can be opened in the process, remaining time and
the Door Lock icon in display will flash. Then the Door Lock
icon will go out, and the door can be opened.
•If the Door Lock icon doesn't flash, it indicates that current
temperature is over 50℃ or you have passed the time for
reloading in the process, namely no clothes allowed to load
into the machine.
X08080604A