Cisco APIC M3 Installation And Service Manual page 63

Maintaining the Server
Figure 25: Removing the CPU/Heatsink Assembly
1
2
3
Step 2 Transfer the CPU socket covers from the new system to the system that you are returning:
a) Remove the socket covers from the replacement system. Grasp the two recessed finger-grip areas marked "REMOVE"
and lift straight up.
Keep a firm grasp on the finger-grip areas at both ends of the cover. Do not make contact with the CPU
Note
socket pins.
Heatsink
Heatsink captive nuts (two on each side)
CPU carrier (below heatsink in this view)
CPU socket on motherboard
4
T-30 Torx driver
5
-
Cisco APIC M3/L3 Server Installation and Service Guide
Moving an M5 Generation CPU
55