How To Use The Advanced Functions; Sleep Function; Swing Function; Shortcut Function - Toshiba RAC-PD0811CRU User Manual

How to Use the Advanced Functions

SLEEP Function

The SLEEP function is used to decrease
energy use while you sleep (and don't need
the same temperature settings to stay
comfortable). This function can only be
activated via remote control.
Note:
The SLEEP function is not
available in FAN or DRY mode.

SWING Function

Used to stop or start louver movement and set the
desired up/down air flow direction. The louver
angle changes in 6 degree increments with each
press (not all models). By pressing for more than 2
seconds, the louver auto swing feature is activated.
NOTES
guration shown in illustrations is based on a typical model and may be slightly
erent from the actual one you purchased. In this case, the actual physical remote shall prevail.
• All the functions described can also be accomplished by using the unit's control panel. If the
unit is without this feature, there will be no corresponding operation when pressing the relevant
button on the remote controller.
• When there are di erences between features or operation implied by the remote control
illustration and the actual functions described in the USER MANUAL, the descriptions in the
USER MANUAL shall prevail.
User Manual

SHORTCUT Function

Used to restore the current settings or resume
previous settings.
Push this button when remote controller is on,
the system will automatically revert back to the
previous settings including operating mode,
setting temperature, fan speed level and sleep
feature (if activated).
By pressing for more than 2 seconds, the
system will automatically restore the current
operation settings including operating mode,
setting temperature, fan speed level and sleep
feature (if activated).
Page 25