Brivo ACS300 Quick Start Manual page 2

Wi-Fi Configuration
1. Connect a CAT5 cable to the LAN/PoE port (left port) on the ACS300. This will power up the ACS300 unit if the CAT5 cable is
connected to a PoE+ switch.
2. Verify connectivity using the ACS300 Panel Light Indicators table (on the opposite page).
3. Turn off all internet connections to your computer.
4. Connect your computer via CAT5 cable to the Admin port (right port) on the ACS300.
5. Open your Internet browser, and type in the following IP address into the address bar:
6. When prompted, enter the following:
User name:
Password:
7. From the main page of the Networking Admin Interface, click on the Networking tab and then click on the WiFi sub tab.
8. When the WiFi settings page appears, make sure the Enable WiFi checkbox is checked.
9. Enter the SSID name of your WiFi network or select from the list of available SSIDs automatically populated after scan.
10. Enter the WPA Passphrase (and check the Hide Passphrase checkbox if you want the field hashed).
11. The default setting is DHCP. If you choose Static settings, refer to the Panel Networking Admin Interface Guide for further
instructions on static networking configuration.
12. Click Save.
13. Disconnect your computer from the ACS300.
14. Log into your Brivo Onair account.
15. Click on the Setup dropdown menu, choose the Site/Doors tab, then click on the Control Panels link.
16. If the panel has already been added to the Brivo Onair account, the Last Contact field should be populated with today's date
and a recent timestamp. This indicates successful configuration of the ACS300.
Legal Disclaimers
The product is designated FOR INDOOR USE ONLY. The product is sensitive to Electrostatic Discharges (ESD). The product may
be damaged or destroyed if handled or wired improperly. Follow all safe handling and installation precautions at all times.
192.168.207.1
cli
new5cli
ACS300 Quick Start Guide
Questions
Review the ACS300 Installation Manual at
www.brivo.com/techdocs
Call Brivo Customer Care at (866) 274-8648
Email customercare@brivo.com
P-MAN-PUB-ACS300 Quick Start Guide 1.6