Maintain tools and filter
CLEANING THE ROBOTIC VACUUM CLEANER
PLEASE KEEP THE CLEANING AND MAINTENANCE METHODS IN MIND
When the Power Switch is damaged, please contact the
■
service agent so that it does not cause any accidents.
Do not use any means or mechanical devices not
■
installed by the manufacturer that could accelerate the
deformation of the robotic vacuum cleaner.
CLEANING THE SENSOR WINDOW AND THE CAMERA
You must turn off the Power Switch at the bottom of
the main unit before cleaning the robotic vacuum.
Never spray water, thinner, benzene etc. directly onto the
■
main unit of robotic vacuum cleaner.
Camera
Front Sensor window
Front Sensor Window and
34_ Maintain tools and filter
Always turn off the power switch at
■
the bottom of the main unit before
cleaning the robotic vacuum. The
robotic vacuum cleaner could operate
suddenly and cause an injury.
Lightly wipe the sensor window or
■
camera using a soft cloth.
Display Panel
Camera
Cliff Sensor Window
Rear Sensor Window