Navigation Settings; Restoring The Factory Default Settings - Garmin GPSmap 585 Plus Owner's Manual

Waypoint IDs: Sets the device to transmit waypoint names or numbers via
NMEA 0183 while navigating. Using numbers may resolve compatibility
issues with older NMEA 0183 autopilots.
MMSI: Allows you to enter your Mobile Marine Safety Identity (MMSI) number.
Diagnostics: Displays NMEA 0183 diagnostic information.
Defaults: Restores the NMEA 0183 settings to the original factory defaults.

Navigation Settings

NOTE: Some settings and options require additional charts or hardware.
Select Settings > Navigation.
Route Labels: Sets the type of labels shown with route turns on the map.
Auto Guidance: Sets the parameters the chartplotter uses when calculating
an Auto Guidance path, when you are using some premium maps.
Turn Transition Activation: Sets the turn transition to be calculated based
on time or distance.
Turn Transition Time: Sets how many minutes before the turn that you
transition to it as the next leg, when Time is selected for the Turn
Transition Activation setting. You can raise this value to help improve the
accuracy of the autopilot when navigating a route or an Auto Guidance
path with many frequent turns or at higher speeds. For straighter routes or
slower speeds, lowering this value can improve autopilot accuracy.
Turn Transition Distance: Sets how far before the turn that you transition
to it as the next leg, when Distance is selected for the Turn Transition
Activation setting. You can raise this value to help improve the accuracy of
the autopilot when navigating a route or an Auto Guidance path with many
frequent turns or at higher speeds. For straighter routes or slower speeds,
lowering this value can improve autopilot accuracy.
Route Start: Selects a starting point for route navigation.
54

Restoring the Factory Default Settings

NOTE: This deletes all settings information you have entered.
Select Settings > System > System Information > Factory Settings.
GPSMAP 585 Plus
®