Setting The Scroll Speed; Sonar Appearance Settings - Garmin GPSmap 585 Plus Owner's Manual

NOTE: Showing a depth line on one screen displays the depth line on all the
screens.
1 From a sonar screen, select MENU > Sonar Setup > Depth Line.
2 Select MENU.
3 To adjust the Depth Line, select

Setting the Scroll Speed

You can set the rate at which the sonar image moves across the screen. A
higher scroll speed shows more detail, especially while moving or trolling. A
lower scroll speed displays sonar information on the screen longer. Setting
the scroll speed on one sonar view applies to all the sonar views.
1 From a sonar view, select MENU > Sonar Setup > Scroll Speed.
2 Select an option:
• To adjust the scroll speed automatically using speed-over-ground,
select Auto.
18
or .
The Auto setting selects a scroll rate to match the boat speed, so
targets in the water are drawn with the correct aspect ratio and appear
less distorted.
• To use a very fast scroll speed, select Ultrascroll.
The Ultrascroll option quickly scrolls new sonar data, but with a reduced
image quality. For most situations, the Fast option provides a good
balance between a quickly scrolling image and targets that are less
distorted.

Sonar Appearance Settings

From a sonar view, select MENU > Sonar Setup > Appearance.
Information is for reference only. Disabling warnings for underwater hazards
can result in death, personal injury, or property damage. You are responsible
for the safe and prudent operation of your vessel.
WARNING
GPSMAP 585 Plus
®