INDEX Diagram Characteristics of the appliances Technical data 4 Installation instructions 4.1 Installation 4.2 Legal and technical requisites 4.2.1 Installation 4.2.2 Wiring 4.2.3 Unipotential 4.2.4 Start-up Set-up for operation 5.1 Ignition 5.2 Cleaning and taking care of the appliance 5.3 What to do if not using the appliance for a long time 5.4 What to do if something goes wrong 5.5 Maintenance 5.5.1 WEEE Directive...
5). Warning! • Wire entry on top models is on the back wall, and underneath MODEL AGB 508/WP all other models. • if this model is going to be mounted on its own, it must • In both cases the terminal board is at the front, behind the con- trol panel.
5 - SET-UP FOR OPERATION Warning! If any rust should form on the bottom of the pan due to water or moisture and lack of adequate protection after use, it will continue to expand until it - Beware of inexpert handling! corrodes the pan.
6 - INSTRUCTIONS FOR USE 5.5.1 The 2002/96/EC (WEEE) Directive: information to users This informational note is meant only for owners of equipment marked with the sym- bol shown in Fig. A on the adhesive label featuring the technical specifications applied on the actual product (the label also giving the serial number).
7 - APPENDIX: ELECTRICAL DIAGRAMS AGB 508/WP 11 21 31 12 22 32 L 1 L 2 L 3 N 400V 3N L 1 L 2 L 3 230V 3 Line input terminal board Switch Thermostat Safety thermostat Contactor Green pilot lamp...
Page 10
THE MANUFACTURER RESERVES THE RIGHT TO MAKE ANY CHANGES DEEMED NECESSARY. THE MANUFACTURER CANNOT BE HELD RESPONSIBLE IF THE INSTRUCTIONS CONTAINED IN THIS MANUAL ARE NOT OBSERVED. WHIRLPOOL EUROPE srl V.le Guido Borghi, 27 I – 21025 Comerio – VA...
Need help?
Do you have a question about the AGB 508/WP and is the answer not in the manual?
Questions and answers