Advertisement
Table of Contents
RFID Setup Guide
Connect the DL3/DL3FE with RFID, enter the
1
"Admin" passcode and select "Setup".
Select the "System" option then select the
2
"Arrow" icon to move to the next screen.
Select the "RFID" option and select "On" to
3
enable RFID.
Select the "Add RFID Tag" option.
4
Swipe the RFID tag at the bottom right corner
5
of the device until you hear a beep.
Record the Tag ID in case the physical tag is
6
lost.
Select the back arrow until you get back to the
7
"Connect" screen. Select "Connect" to save.
Your settings have been saved and your RFID is
setup and ready for use.
Video Setup Guide
DL3FE with RFID
@
Youtube.com/datalocker
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for DataLocker DL3
Summary of Contents for DataLocker DL3
- Page 1 DL3FE with RFID RFID Setup Guide Connect the DL3/DL3FE with RFID, enter the “Admin” passcode and select “Setup”. Select the “System” option then select the “Arrow” icon to move to the next screen. Select the “RFID” option and select “On” to enable RFID.
- Page 2 Record Your RFID Tag ID Record your 20 character RFID Tag ID. Two characters per space. This Tag ID can be manually entered on the device in the event you lose your RFID tag. Tag ID 1 Date Tag ID 2 Date Tag ID 3 Date...
Need help?
Do you have a question about the DL3 and is the answer not in the manual?
Questions and answers