Advertisement
ADJUSTMENTS
Warning!
Before riding, always make sure that the basic settings
made by Öhlins are according to recommended
Set-up Data. Read about adjustments and setting up
in the Öhlins Owner's Manual before you make any
adjustments. Contact an Öhlins dealer if you have any
questions about setting up.
SET-UP DATA
Recommended set-up
Spring Preload............................ 3 mm.
Rebound adjuster ...................... 15 Clicks
Spring data
Installed Spring
Part No
60360-02
Free spring length
200 mm.
Spring rate
Prog.12-19 N/mm.
Preload adj.range
[0-24] mm.
For rider's weight
Below 80 kg
Öhlins products are subject to
continuous improvement and
development, therefore, although
these instructions include the most
up-to-date information available at
the time of printing, minor updates
may occur.
© Öhlins Asia Co. Ltd. All rights
reserved. Any reprinting or
unauthorized use without the written
permission of Öhlins Racing AB
is prohibited.
Rebound
Adjuster
Shock absorber data
Length .................... 347 mm.
Stroke ....................
Alternative Spring
60360-03
200 mm.
Prog .15-24 N/mm.
[0-16] mm.
Above 80 kg
To find the latest information
contact an Öhlins distributor.
Please contact Öhlins if you have
any questions regarding the
contents in this document.
Öhlins Asia Co. Ltd
700/937 Moo5, Tambol Nongkhaga,
Amphur Phantong, Chonburi Province
20160 Thailand
Spring Preload
Adjuster
104 mm.
Part no. MI_HO 810_EN_0
Issued 2018-03-27
Advertisement
