Internal Calls; Calling Other Extensions; Answering Internal Calls - Samsung iDCS500 User Manual

Samsung iDCS500

INTERNAL CALLS

CALLING OTHER EXTENSIONS

1. Dial the extension number or group number.
2. Wait for the party to answer. If you hear a brief tone burst instead of ring-
back tone, the extension you called is set for Voice Announce or Auto
Answer. Begin speaking immediately after the tone.
3. Finish the call by replacing the handset or pressing the ANS/RLS key.
Note:
If you have a DSS key assigned to an extension or a extension group, you can
press this key instead of dialling the number.
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker key before you begin dialling.

ANSWERING INTERNAL CALLS

Your keyset can answer internal calls in one of three modes: Ring, Voice
Announce or Auto Answer. Ring mode is the default mode.
RING MODE
1. When your keyset rings, simply lift the handset
OR
Press the ANS/RLS key to be connected to the calling extension.
2. Finish the call by replacing the handset or pressing the ANS/RLS key.
See Ring Preference
VOICE ANNOUNCE MODE
When another extension calls you, your keyset will sound a brief attention
tone and you will hear the caller's announcement.
1. Press the ANS/RLS key to turn on the microphone and speak hands-
free.
OR
Lift the handset to reply.
in the section "Customising Your Keyset".
– 13 –
iDCS Keyset User Guide