Samsung iDCS500 User Manual page 46

Samsung iDCS500
ber. Your Message key LED and keyset status indicator will stop flash-
ing.
Note: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the Speaker key before you begin dialling.
VIEWING, CLEARING AND RETURNING
MESSAGES
If your Message key and keyset status indicator are flashing, you can view
the message waiting indications before you answer them. There may be up
to five indications left at your extension.
With the handset on-hook, press the flashing Message key. The first
station that left a message waiting indication will be displayed.
Press the Volume keys or NEXT soft key to scroll through other stations
that left message waiting indications.
As you view each indication, you have the choice to REPLY or CLEAR. If
you reply, you will ring the extension displayed. If you clear, the mes-
sage indication is deleted without a reply.
Press the ANS/RLS key to return your keyset to the idle condition.
RETURNING MESSAGES WITHOUT
VIEWING THEM
To answer message waiting indications at your keyset without first viewing
them:
1. Press the Message key or dial 43. The first extension that left you a
message will be called automatically. (If that extension does not answer,
your Message key LED and keyset status indicator will continue to
flash.)
2. Repeat step 1 until all messages have been returned in the order they
were received.
Your Message key LED and keyset status indicator will turn off when all
messages have been returned.
Note:
If the Hot Keypad feature has been turned off, you must first lift the handset or
press the Speaker key before you begin dialling.
If a message has been left at your keyset by a keyset in Auto Answer mode,
you must manually cancel the message after it has been returned (see
above).
iDCS Keyset User Guide
– 38 –